Limited! Lil' Swampy Functional Reproduction Swamp Cooler
Lil’ Swampy is back!! I’ve secured a limited quantity of the parts needed to manufacture a few more lil’ swampys. Lil’ swampy swept america and the world by storm in 2019 and shipped nearly 100 units worldwide in 2020. We literally exhausted the supply of many of the parts.
This is the third style of cooler I’ve created for sale originally on etsy. This one is the first cooler with a main body hand made, and no moving internal parts. There is a filter in a tray that can be wet for a decrease in temperature of air entering the vehicle through the cooler. Too much water in the tray can spill. Keep tray water levels low on vehicles with slanted in windows as excessive water will drip into the vehicle. Cooler comes plain steel, paint or clear coat before use (or any exposure to moisture) or cooler will get a rust patina. Original design rolled up in the window alone with a 19”x2” squared vent. There’s also an added bracket that can secure the cooler to the top of the door/window opening which adds to the overall width by 1".
For about 6 years I've been making and selling these swamp coolers. I've made over 200 and shipped them all over the world. This is a new cheaper listing for the same product sold on the Chrisbcritters art page since 2016.
See shipping page for more info on shipping and tips on duty fees, and how to safely receive the cooler
See it function dry and wet (4:22 approximately)
Building and testing the prototype: https://youtu.be/oSJnxY4ixC0
Cooler and bracket installation: https://youtu.be/mwOHezaa70o
Caution: Blowing air can and likely will carry debris from the cooler into the cab. The screen and filter do not filter everything out. Ideally eye protection should be worn or any method to prevent debris from entering users eyes. Though this is the lightest cooler I’ve made by far, I cannot condone street use, nor am I liable for any damage caused by the cooler. Use with caution and use around others isn’t recommended. Ecophage Fabrication LLC
Lil’ swampy functions the same as the Deluxo unit. The difference being the body of the Deluxo is bolt together assembly with a flatter face. The Lil’ Swampy has a welded body design which makes it a bit stronger. This rigidity does come with one down side. No replacement of pieces. The Deluxo on the other hand can be taken apart and replaced piece by piece if needed.
The Lil swampy has a bracket bar that fully cradles the unit.
Lil’ Swampy is back!! I’ve secured a limited quantity of the parts needed to manufacture a few more lil’ swampys. Lil’ swampy swept america and the world by storm in 2019 and shipped nearly 100 units worldwide in 2020. We literally exhausted the supply of many of the parts.
This is the third style of cooler I’ve created for sale originally on etsy. This one is the first cooler with a main body hand made, and no moving internal parts. There is a filter in a tray that can be wet for a decrease in temperature of air entering the vehicle through the cooler. Too much water in the tray can spill. Keep tray water levels low on vehicles with slanted in windows as excessive water will drip into the vehicle. Cooler comes plain steel, paint or clear coat before use (or any exposure to moisture) or cooler will get a rust patina. Original design rolled up in the window alone with a 19”x2” squared vent. There’s also an added bracket that can secure the cooler to the top of the door/window opening which adds to the overall width by 1".
For about 6 years I've been making and selling these swamp coolers. I've made over 200 and shipped them all over the world. This is a new cheaper listing for the same product sold on the Chrisbcritters art page since 2016.
See shipping page for more info on shipping and tips on duty fees, and how to safely receive the cooler
See it function dry and wet (4:22 approximately)
Building and testing the prototype: https://youtu.be/oSJnxY4ixC0
Cooler and bracket installation: https://youtu.be/mwOHezaa70o
Caution: Blowing air can and likely will carry debris from the cooler into the cab. The screen and filter do not filter everything out. Ideally eye protection should be worn or any method to prevent debris from entering users eyes. Though this is the lightest cooler I’ve made by far, I cannot condone street use, nor am I liable for any damage caused by the cooler. Use with caution and use around others isn’t recommended. Ecophage Fabrication LLC
Lil’ swampy functions the same as the Deluxo unit. The difference being the body of the Deluxo is bolt together assembly with a flatter face. The Lil’ Swampy has a welded body design which makes it a bit stronger. This rigidity does come with one down side. No replacement of pieces. The Deluxo on the other hand can be taken apart and replaced piece by piece if needed.
The Lil swampy has a bracket bar that fully cradles the unit.
Lil’ Swampy is back!! I’ve secured a limited quantity of the parts needed to manufacture a few more lil’ swampys. Lil’ swampy swept america and the world by storm in 2019 and shipped nearly 100 units worldwide in 2020. We literally exhausted the supply of many of the parts.
This is the third style of cooler I’ve created for sale originally on etsy. This one is the first cooler with a main body hand made, and no moving internal parts. There is a filter in a tray that can be wet for a decrease in temperature of air entering the vehicle through the cooler. Too much water in the tray can spill. Keep tray water levels low on vehicles with slanted in windows as excessive water will drip into the vehicle. Cooler comes plain steel, paint or clear coat before use (or any exposure to moisture) or cooler will get a rust patina. Original design rolled up in the window alone with a 19”x2” squared vent. There’s also an added bracket that can secure the cooler to the top of the door/window opening which adds to the overall width by 1".
For about 6 years I've been making and selling these swamp coolers. I've made over 200 and shipped them all over the world. This is a new cheaper listing for the same product sold on the Chrisbcritters art page since 2016.
See shipping page for more info on shipping and tips on duty fees, and how to safely receive the cooler
See it function dry and wet (4:22 approximately)
Building and testing the prototype: https://youtu.be/oSJnxY4ixC0
Cooler and bracket installation: https://youtu.be/mwOHezaa70o
Caution: Blowing air can and likely will carry debris from the cooler into the cab. The screen and filter do not filter everything out. Ideally eye protection should be worn or any method to prevent debris from entering users eyes. Though this is the lightest cooler I’ve made by far, I cannot condone street use, nor am I liable for any damage caused by the cooler. Use with caution and use around others isn’t recommended. Ecophage Fabrication LLC
Lil’ swampy functions the same as the Deluxo unit. The difference being the body of the Deluxo is bolt together assembly with a flatter face. The Lil’ Swampy has a welded body design which makes it a bit stronger. This rigidity does come with one down side. No replacement of pieces. The Deluxo on the other hand can be taken apart and replaced piece by piece if needed.
The Lil swampy has a bracket bar that fully cradles the unit.
